3952 Old Goat-Naluwan ウォールナット オールドツリー 腫瘍ログ カリグラフィー チタンチップ 万年筆 Ω

Tonneau cap shape with grey chrome plated clip metal fittings. Use German goat BOCK#250 (#6) to manually adjust and grind the calligraphy titanium tip, which is hand-crafted and ground by an old goat craftsman and adjusted to be able to write the charm of the change of thickness and drop. The brand exclusively designs and develops the characteristic pen clip with mold opening. The special shape has a spring mechanism and adopts a rotating pen cap design. Commodity combination: free German-made Schmidt K2 ink absorber (without ink) + a cowhide pen case hand-sewn by a Taiwanese master (color and style shipped randomly) + 3952 exquisite wooden gift box packaging. In response to environmental protection, we will not provide paper bags voluntarily. If you need gifts, you can take the initiative to inform us in the remarks, thank you. Pen Size: Barrel Diameter: 14.5mm Cover Length: 144mm with Nib: 127mm Cap Diameter: 14.5mm Whole Weight: About Whole Length: 150mm The characters should not be pointed and written on the left and right, so as not to accidentally cause the dislocation of the iridium point, resulting in the phenomenon of scraping the end of the paper. The tip of the pen should be rinsed with water frequently to avoid ink sticking and affect the writing quality, and the inside of the cap should also be cleaned with a cotton swab. Hand-adjusted calligraphy tips: 1. For calligraphy tips, it is generally recommended to dip them in ink, run them in for a period of time, and then use an ink absorber. 2. If the ink absorber is used, the ink will be broken, depending on the angle of the hand-held tip, the left and right iridium dots should fall on the paper at the same time, and do not write on one side. The ink will break again, and see if there is paper fiber dander stuck on the pen tip. 3. Unplug the ink absorber and try to ink the center of gravity. 4. Wash the pen tip first. If the left and right iridium dots are written on one side, and the tip is pressed hard, it is easy to cause the iridium dot to dislocate, that is, there is a height difference between the left and right, which will scrape the paper and accumulate paper scraps in the sharp seam. 5. The calligraphy tip is adjusted with the EF tip to have a curved tip. The thickness of writing is not by pressing the tip, but by the angle of holding the pen, and using the arc of the tip of the pen tip to write the thickness. Hold the pen straighter, the junction area between the nib and the paper is small, and the lines you write will be thinner. The more inclined the pen is, the more the junction area between the pen tip and the paper, and the thicker the lines written. Warm reminder: The inside of the cover is usually cleaned with a cotton swab. When the pen is idle for a long time, do not place the pen tip down. The picture is for reference only, the product is a single piece.